Rack building components
Those of you that are familiar with "T-slot" extruded aluminum recognize the versatility of this system. Much like a childs erector set, these universal components allow you to design and build a rack having virtually any configuration you can imagine. We offer these racks two ways: Complete turn-key rack packages or as mix-n-match component sets. Just send us a sketch or a written description of you requirements and will provide you with all the materials needed to build your "custom" rack.
Pricing:
Click photo above to see larger images.
Add more shelves to your existing rack, or build one from scratch. We will provide everything you need, including free advice! We offer a wide selection of T-slot aluminum extrusion (over 30 different profiles from five different manufacturers), in addition to steel frames, platforms and all the screws, nuts and bolts you'll ever need.
Also, please visit our frequently asked questions page for more information.
45 Series Stackable Columns:
A set of four columns in your choice of 6", 9.5" or 12" length. Includes receptor caps and brass cones in choice of finishes.
Columns in Silver or Black $175.00
Signature-Series 45mm and 60mm plain caps:
45mm: $2.50 each
60mm: $3.50 each
Bulk form T-slot extruded alumium:
We offer a huge selection of extruded aluminum. Please call us to discuss you needs and for pricing.
Modular-Series octagonal columnss:
Octagon columns (silver or black finish): $15.00 per linear foot
Modular-Series hexagon and octagon caps:
Octagon: $2.50 each
Hexagon: $2.25 each
Modular-Series 1/4-20 threaded star inserts:
5/8, 3/4 and 7/8 inch diameter $2.50 each
45-Series X-frames:
Your choice of black, silver or gold finish, hardware included: $175.00 each
Custom Modular Rack Frame Assemblies:
The simple, clean design of this rack frame is based on just two basic components: the cross-beam and the column. Much like a childs erector set, these universal components allow you to design and build a rack having virtually any configuration you can imagine. And better yet, if your needs change, just tear it apart and start over. Also available in black, at no extra charge!
We offer these racks two ways: Complete turn-key rack packages , or as mix-n-match component sets. Just send us a sketch or a written description of you requirements and will provide you with all the materials needed to build your "custom" rack. We stock the aluminum beams and columns in 16 foot lengths. For a small additional charge we will cut them to any length, machine the ends, and pre-install the connector assemblies.
Call or email for pricing
Modular Series Cross-Beams
Extruded aluminum cross-beams, machined ends with pre-installed connector assemblies. A universal T-slot runs along the top edge, making it easy to intall after-market coupling and wire-management devices.
For use with our modular series Hexagonal and Octagonal columns only.
Extra-wide, twin-connector beams: used for supporting televisions and for bridging center-channel speakers. 24", 36", 48", 60" and 72" inch versions. $45.00 to $90.00 each
Standard, twin-connector beams: used at the base perimeter of the rack. Also use these at the top of the rack if the columns exceed 32 inches in height 12" 14" 18" 19.5" $40.00 each
Standard, single connector beams: used for supporting platforms. 12" 14" 18" 19.5" $25.00 each
Modular Series Connectors:
The patented, connectors make assembly a snap! The entire rack may be assembled using just one simple allen wrench. Rotating the socket-head screw causes the T-bar to retract, thus locking the cross-beam to the column.
$6.50 each
Universal Brackets:
Univeral L-brackets: great for connecting two extrusions at right angles, or for use as platform supports. Includes hardware!
$5.50 each
Capitals
Commonly referred to as "end caps" on most racks, these precision machined units serve several functions on the Adona rack. Obviously they add a "finishing touch" to the top of the column, but more importunately they provide a means of coupling (or decoupling) and allow platforms or additional rack layers to be placed above the columns.
We offer a huge selection of capitals and end-caps, please call for application info and pricing.
Footers:
The primary function of spiking is to focus the weight of the rack onto an infinitely small surface area, although some floor finishes make the use of such devices impractical. Therefore, we offer optional floor discs, as well as glides and casters.
We offer a huge selection of footers, please call for application info and pricing.
Visit our Tweaks page for a wide selection of spikes, cones, discs, casters and other coupling devices.
.